HP Moonshot-180G Betriebsanweisung PDF herunterladen (Seite 353)

100

101

Storm-Control Commands

CLI Command Reference

September 2014 Page 353

HP Moonshot Switch Module CLI Command Reference

no storm-control broadcast

Use this command to disable broadcast storm recovery mode for all interfaces (Global Config mode) or one or

more interfaces (Interface Config mode).

storm-control broadcast level

Use this command to configure the broadcast storm recovery threshold for all interfaces (Global Config mode)

or one or more interfaces (Interface Config mode) as a percentage of link speed and enable broadcast storm

recovery. If the mode is enabled, broadcast storm recovery is active, and if the rate of L2 broadcast traffic

ingressing on an interface increases beyond the configured threshold, the traffic is dropped. Therefore, the rate

of broadcast traffic is limited to the configured threshold.

no storm-control broadcast level

This command sets the broadcast storm recovery threshold to the default value for all interfaces (Global Config

mode) or one or more interfaces (Interface Config mode) and disables broadcast storm recovery.

storm-control broadcast rate

Use this command to configure the broadcast storm recovery threshold for all interfaces (Global Config mode)

or one or more interfaces (Interface Config mode) in packets per second. If the mode is enabled, broadcast

storm recovery is active, and if the rate of L2 broadcast traffic ingressing on an interface increases beyond the

configured threshold, the traffic is dropped. Therefore, the rate of broadcast traffic is limited to the configured

threshold.

Format

no storm-control broadcast

Mode • Global Config

•Interface Config

Default 5

Format

storm-control broadcast level 0-100

Mode • Global Config

•Interface Config

Format

no storm-control broadcast level

Mode • Global Config

•Interface Config

Default 5%

Format

storm-control broadcast rate 0-14880000

Mode • Global Config

•Interface Config

1 2 ... 348 349 350 351 352 353 354 355 356 357 358 ... 718 719

Kommentare zu diesen Handbüchern

Keine Kommentare

HP Moonshot-180G Betriebsanweisung Seite 353

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software HP Moonshot-180G