HP P6350 Bedienungsanleitung PDF herunterladen (Seite 43)

3. Select Restart on the iSCSI Controller Shutdown Options window (Figure 17 (page 46)).

Figure 17 iSCSI Controller Shutdown Options

The following is an example of the shutdown procedure using the CLI:

MEZ75 login: guest

Password:********

Welcome to MEZ75

**********************************************

* *

* HP StorageWorks MEZ75 *

* *

**********************************************

MEZ75 #> admin start -p config

MEZ75 (admin) #> shutdown

Are you sure you want to shutdown the System (y/n): y

Using the management module

Connecting to the management module

You can connect to the management module through a public or a private network.

NOTE: If you are using HP P6000 Command View on the management server to manage the

P63x0/P65x0 EVAs, HP recommends that when accessing HP P6000 Command View on either

the management server (server-based management) or the management module (array-based

management), you use the same network. This is recommended until a multi-homed solution is

available, which would allow the management module access to be configured on a separate

network (private or different).

If you use a laptop to connect to the management module, configure the laptop to have an address

in the same IP range as the management module (for example, 192.168.0.2 with a subnet mask

of 255.255.255.0).

The management module has an MDI-X port that supports straight-through or crossover Ethernet

cables. Use a Cat5e or greater cable to connect the management module from its Ethernet jack

(2, Figure 18 (page 44)) to the management server.

Using the management module 43

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 315 316

Keine Kommentare

HP P6350 Bedienungsanleitung Seite 43