HP xw8600 Workstation Spezifikationen Seite 83

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 180
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 82
If multiple DIMMs are installed in a workstation, install them in pairs of the same rank, DRAM
technology, speed and capacity in each channel.
DDR2-667 and DDR2-800 DIMMs cannot be mixed in the same system.
DDR2-667 Fully Buffered DIMM support
The HP xw8600 Workstation supports the following DDR2-667 Fully Buffered DIMMs:
Double Data Rate 2-667 MHz (DDR2-667), Fully Buffered DIMMs (FBD)
PC2-5300F FBD, Error Checking and Correcting (ECC) (72-bit ECC)
512-MB, 1-GB, 2-GB, 4-GB and 8-GB DIMMs
Cannot be used with 1600-MHz Front Side Bus (FSB) processors
Cannot be intermixed with DDR2-800 Fully Buffered DIMMs
NOTE: The 8-GB DDR2-667 DIMM is not supported on the system board.
DDR2-800 Fully Buffered DIMM support
The HP xw8600 Workstation supports the following DDR2-800 Fully Buffered DIMMs:
Double Data Rate 2-800 MHz (DDR2-800), Fully Buffered DIMMs (FBD)
PC2-6400F FBD, Error Checking and Correcting (ECC) (72-bit ECC)
1-GB, 2-GB, and 4-GB DIMMs
Must be used only with 1600-MHz Front Sided Bus (FSB) processors
Cannot be intermixed with DDR2-667 Fully Buffered DIMMs
NOTE: The 4-GB DDR2-800 DIMM is not supported on the system board.
Supported system board DIMM configurations
The HP xw8600 Workstation supports the following Dual Inline Memory Module (DIMM) configurations
on the system board:
Eight DIMM slots
Configurable for Single Channel (one DIMM), Dual Channel (two DIMMs), or Quad Channel (sets
of four DIMMs)
No support for mirroring
No support for DIMM sparing
Supported memory riser DIMM configurations
The HP xw8600 Workstation supports the following memory module configurations with memory risers:
Four memory riser cards with four slots each (maximum of 16 DIMMs)
Loaded in pairs only
No support for mirroring
No support for DIMM sparing
Further details on supported memory module configurations are given in the following sections.
ENWW Removing and replacing components 73
Seitenansicht 82
1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 179 180

Kommentare zu diesen Handbüchern

Keine Kommentare