HP T100 Betriebsanleitung PDF herunterladen (Seite 6)

3.1. Preparation For Installation

Unauthorized modifications or alterations to the unit are not allowed and will

void the warranty.

Installation location: Indoor; max. 2000 m above mean sea level.

The following is applicable for open buildings and operations rooms which are not fully air

conditioned:

Temperature: +5°C - +40°C (+ 41°F ... +100 °F)

Relative humidity: 5 - 85%, non-condensing.

Air pressure: 86 kPa - 106 kPa (12.5 psi - 15.4 psi)

3.2. Vacuum Connection

Dirt and damage have an adverse effect on the function of these vacuum

components.

Please take account of the instructions with regard to cleanliness and damage

prevention when using vacuum components.

Set-Up Configuration

The gauge may be mounted in any orientation. A horizontal to upright orientation is to be

preffered to keep condensates and particles from getting into the measuring chamber.

Connection

➡ Remove the protective cover. Do not discard the protective cover as it is required during

maintenance work.

➡ Make vacuum connection via a small flange QF16 (DN 40 KF) with version KTR34130 or

DN 40 CF with version KTR34330.

Where excess pressure is involved in the vacuum system > 750 Torr (1 bar):

Inadvertent opening of elements under stress can lead to parts flying around.

➡ Only use stressed elements which can be opened and closed (for example QF16 (DN 16KF)

clamp).

WARNING

CAUTION

3. Installation

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Keine Kommentare

HP T100 Betriebsanleitung Seite 6