HP X Unified Security Platform Series Betriebsanweisung Seite 49

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 142
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 48
configure
X Family CLI Reference V 2.5.1 41
set email
notification
server domain
name
Use configure terminal default-alert-sink domain to set the email notification servers domain
name.
hostname# conf t default-a domain mycompany.com
conf t default-gateway ip
The configure terminal default-gateway command defines a default gateway for the device. The
command configures the default route which is used to direct traffic when the device has no specific
route information for the destination. Normally this is the address of the ISP or upstream router
attached to the external virtual interface on the WAN port. In some network topologies another
internal device provides the route to the nternet; if so, this address can be a router on an internal
virtual interface. conf t no default-gateway disables the default-gateway feature.
set the default
gateway
Use conf t default-gateway to set the default gateway. In this example, the gateway address is defined
as 111.222.33.200:
conf t default-g 111.222.33.200
conf t dhcp-server
The configure terminal dhcp-server command configures the DHCP server inside the
device.
addresses < group group-name | subnet ip netmask mask | range ip1 ip2 | none >
configures the pool of IP addresses that are available to DHCP clients. The none option
removes an address group which was previously configured as the DHCP server address pool
source.
bootp < enable | disable >
enable or disable bootp.
disable
disables the DHCP server.
dns < default | server1 ip1 [server2 ip2 [server3 ip3] ] [domain domain-name] >
configures DNS settings for the DHCP server.
enable
enables the DHCP server.
lease-duration mins
set the lease duration time in minutes.
nbx nbx-ip
provides the NBX call processor address to phones that acquire their address via DHCP.
relay < disable | broadcast | <server ip [ relay-from-vpn] | tunnel tunnel-name >
configures DHCP relay.
Seitenansicht 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 141 142

Kommentare zu diesen Handbüchern

Keine Kommentare