HP 5000 Router Series Installationshandbuch PDF herunterladen (Seite 25)

Verifying the Installation 23

Use the following procedure to connect the serial cable (take the connection from

SERIAL0 to DSU/CSU):

1 Turn off power to the router.

2 Choose the appropriate serial cable.

3 Plug the DB-50 adapter of the cable into the SERIAL0 port of the router.

4 Connect the other end of the cable to the CSU/DSU device. (If the WAN uses a

dial-up line, connect the cable to the serial port of the analog modem.

Figure 15 Connecting the Serial Port to DSU/CSU

Verifying the

Installation

Verify whether the router has been correctly installed by checking the following

items:

■ There is airflow around the router

■ Power is connected correctly

■ The ground wire of the router is correctly connected

■ The router is connected to other devices, such as the console terminal

DSU/CSU

Serial interface

SERIAL0

interface

Synch/asynch cable

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 61 62

Keine Kommentare

HP 5000 Router Series Installationshandbuch Seite 25