HP 100VG Betriebsanweisung PDF herunterladen (Seite 33)

Connecting an Ethernet/IEEE 802.3 LAN

A Hub-14 can be connected to an Ethernet or IEEE 802.3 10 Mbit/s network.

To connect to an Ethernet/IEEE 802.3 LAN, the hub must contain the

following accessory products:

HP J2414B 100VG/ET SNMP/Bridge Module installed in the 100VG

Expansion Slot in the back of the hub, and

One of the following Ethernet/IEEE 802.3 Transceiver modules installed

in the “AUI/Xcvr Slot” on the module:

• HP J2606A Fiber-Optic Transceiver for 10Base-FL

• HP J2607A Twisted-Pair Transceiver for 10Base-T

• HP J2608A ThinLAN Transceiver for 10Base2

• HP J2609A AUI Port for external transceivers

Refer to the installation instructions supplied with these products for

installation and network connection instructions.

The HP J2414B SNMP/Bridge Module installed in the hub’s expansion slot

provides the bridge functionality between the 100 Mbit/s and 10 Mbit/s

networks.

The transceiver module provides the physical interface its respective

Ethernet/IEEE 802.3 network medium.

Installing the

HP AdvanceStack Hub

Installing the HP AdvanceStack Hub

1-19

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 115 116

Keine Kommentare

HP 100VG Betriebsanweisung Seite 33