HP 100VG Betriebsanweisung PDF herunterladen (Seite 27)

Mounting the Hub on a Wall

Important A hub should be mounted only to a wall or wood surface that is at

least 1/2-inch plywood or its equivalent.

1. Using a Phillips (cross-head) screwdriver, attach the mounting brackets

to the hub in one of the positions shown in the illustrations below. Use

the 10-mm M4 screws included in the accessory kit.

2. Attach the hub to the wall or wood surface with 5/8-inch number 12

wood screws (not included).

10-mm M4 screws

Bracket mounting position for flat

mounting on a wall.

Bracket mounting position for

bookshelf-style mounting on a wall.

Plug the power cord into the hub’s

power receptacle before mounting the

hub. There may not be enough room to

do so after the hub is mounted.

10-mm M4 screws

Installing the

HP AdvanceStack Hub

Installing the HP AdvanceStack Hub

1-13

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 115 116

Keine Kommentare

HP 100VG Betriebsanweisung Seite 27