HP Firewall Series Installationshandbuch PDF herunterladen (Seite 26)

Logging in to the firewall through Telnet

NOTE:

For more information about the Telnet login, see the configuration guides for the firewalls.

You can use the default information to log in to the A-F1000-A-EI/A-F1000-S-EI firewall. The default login

information includes:

• Username: admin

• Password: admin

• IP address of port GigabitEthernet 0/0: 192.168.0.1/24

Follow these steps to log in to the firewall through Telnet:

Step1 Log in to the firewall through the console port and then use the telnet server enable command in system

view to enable the Telnet function of the firewall.

By default, Telnet is disabled on the firewall.

Step2 Connect the firewall to a PC.

Connect port GigabitEthernet 0/0 of the firewall to a PC by using an Ethernet cable.

Step3 Configure an IP address for the PC, making sure that the PC and the firewall can ping each other.

Set the IP address to any one but 192.168.0.1 within the range of 192.168.0.0/24. For example, set the

address to 192.168.0.2.

Step4 Use the Telnet command to log in to the firewall.

Logging to the firewall through a web browser

The A-F1000-A-EI/A-F1000-S-EI firewall supports web-based network management, which allows you to

manage and maintain the firewall in a more user-friendly way.

Your A-F1000-A-EI/A-F1000-S-EI firewall was delivered with the default web logging information. You

can use this default information to log in to the web page of your firewall. The default web logging

information includes:

• User name: admin

• Password: admin

• IP address: 192.168.0.1/24

Follow these steps to log in to your firewall through a web browser:

Step1 Connect a cable to the A-F1000-A-EI/A-F1000-S-EI firewall.

Connect the Ethernet interface GigabitEthernet 0/0 of the A-F1000-A-EI/A-F1000-S-EI firewall to a PC

by using a network cable.

Step2 Configure an IP address for the PC, ensuring the PC and the A-F1000-A-EI/A-F1000-S-EI firewall can

ping each other.

Set the IP address to any one but 192.168.0.1 within the range of 192.168.0.0/24. For example, set the

address to 192.168.0.2.

Step3 Launch the web browser and input the login information.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 59 60

Keine Kommentare

HP Firewall Series Installationshandbuch Seite 26