HP Firewall Series Installationshandbuch PDF herunterladen (Seite 24)

Figure 19 Set the serial port used by the HyperTerminal connection

Step3 Click OK after selecting a serial port and the following dialog box appears. Set Bits per second to 9600,

Data bits to 8, Parity to None, Stop bits to 1, and Flow control to None.

Figure 20 Set the serial port parameters

Step4 Click OK after setting the serial port parameters and the system enters the following interface.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 59 60

Keine Kommentare

HP Firewall Series Installationshandbuch Seite 24