HP Pavilion DV6000t Technical Information PDF herunterladen (Seite 87)

Switch cover (see

Switch cover on page 54)

Keyboard (see

Keyboard on page 58)

Speaker assembly (see

Speaker assembly on page 56)

Display assembly (see

Display assembly on page 61)

Top cover (see

Top cover on page 66)

Audio board (see

Audio board on page 77)

USB/power connector board (see

USB/power connector board on page 73)

System board (see

System board on page 74)

Remove the fan/heat sink assembly:

Turn the system board upside down with the expansion port 3 and external monitor port toward you.

2. Disconnect the fan cable (1) from the system board.

3. Loosen the three Phillips PM2.5×5.0 screws (2) and the Phillips PM2.5×4.0 screw (3) that secure

the fan/heat sink assembly to the system board.

4. Remove the fan/heat sink assembly (4).

NOTE: Due to the adhesive quality of the thermal paste and thermal pads located between the

fan/heat sink assembly and system board components, it may be necessary to move the fan/heat

sink assembly from side to side to detach the assembly.

NOTE: The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink

assembly (1) and (2), the processor (3), and the system board component (4) each time the fan/heat

sink assembly is removed. Thermal material must be installed on all surfaces before the fan/heat sink

assembly is reinstalled. Thermal material is included with all fan/heat sink assembly, system board, and

processor spare part kits.

ENWW Component replacement procedures 79

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 147 148

Keine Kommentare

HP Pavilion DV6000t Technical Information Seite 87