HP Pavilion DV6000t Technical Information PDF herunterladen (Seite 81)

USB/power connector board

Description Spare part number

USB/power connector board (includes USB/power connector board cable) 449454-001

Before removing the USB/power connector board, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

Remove the battery (see

Battery on page 40).

Remove the following components:

Hard drive (see

Hard drive on page 45)

Optical drive (see

Optical drive on page 52)

Switch cover (see

Switch cover on page 54)

Keyboard (see

Keyboard on page 58)

Speaker assembly (see

Speaker assembly on page 56)

Display assembly (see

Display assembly on page 61)

Top cover (see

Top cover on page 66)

Remove the USB/power connector board:

1. Remove the two Phillips PM2.5×4.0 screws (1) that secure the USB/power connector board to the

computer.

2. Release the USB/power connector board (2) as far as the USB/power connector board cable will

allow.

ENWW Component replacement procedures 73

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 147 148

Keine Kommentare

HP Pavilion DV6000t Technical Information Seite 81