HP Pavilion DV6000t Technical Information PDF herunterladen (Seite 51)

Display inverter

NOTE: If it has been determined that the display inverter is the component that must be replaced to

complete the computer repair, the display assembly does not have to be removed. Follow the procedures

in this section to replace the display inverter. For information on replacing the display assembly and other

display assembly internal components, see

Display assembly on page 61.

Description Spare part number

Display inverter (includes 2-sided tape) 431391-001

Before removing the display inverter, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

Remove the battery (see

Battery on page 40).

Remove the display inverter:

Turn the computer display-side up, with the front toward you.

Open the computer as far as possible.

3. Remove the two rubber screw covers (1) on the display bezel bottom edge.

NOTE: The display rubber screw covers are included in the Display Screw Kit, spare part number

431399-001.

4. Remove the two Phillips PM2.5×5.0 screws (2) that secure the display bezel bottom edge to the

display assembly.

5. Flex the inside edges of the left and right sides (1) and the bottom edge (2) of the display bezel until

the bezel disengages from the display enclosure.

ENWW Component replacement procedures 43

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 147 148

Keine Kommentare

HP Pavilion DV6000t Technical Information Seite 51