HP 450 Spezifikationen PDF herunterladen (Seite 86)

●

USB board (see

USB board on page 73)

●

Power connector cable (see

Power connector cable on page 75)

To remove the display assembly in its entirety:

1. Disconnect the display panel cable (1) from the system board.

2. Release the wireless antenna cables from the clips (2) built into the base enclosure.

NOTE: Models may have either one or two antennas installed.

CAUTION: Support the display assembly when removing the following screws. Failure to

support the display assembly can result in damage to the display assembly and other

computer components.

3. Remove the five Phillips PM2.5×6.0 screws (1) that secure the display assembly to the

computer.

78 Chapter 4 Removal and replacement procedures

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 141 142

Keine Kommentare

HP 450 Spezifikationen Seite 86