HP 450 Spezifikationen PDF herunterladen (Seite 101)

To remove the fan/heat sink assembly:

1. Disconnect the fan cable (1) from the system board.

2. Loosen the screws on the heat sink (2) that secure the fan/heat sink assembly to the system

board.

NOTE: The number of screws used to secure the fan/heat sink assembly to the system board

varies by computer model.

3. Remove the Phillips PM2.0×3.0 screw (3) that secures the fan/heat sink assembly to the system

board.

4. Remove the fan/heat sink assembly (4).

NOTE: Due to the adhesive quality of the thermal material located between the heat sink and

system board components, it may be necessary to move the heat sink from side to side

to detach it.

NOTE: The following illustration shows the fan/heat sink assembly removal process on a computer

model equipped with an AMD processor.

NOTE: The following illustration shows the fan/heat sink assembly removal process on a computer

model equipped with an Intel processor and a graphics subsystem with discrete memory.

Component replacement procedures 93

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 141 142

Keine Kommentare

HP 450 Spezifikationen Seite 101