Hp Traffic Director sa7220 Bedienungsanleitung PDF herunterladen (Seite 135)

100

101

C H A P T E R 4 Tools Screen

123

Trace

The trace command captures traffic on a network that matches the

given expression. The

trace output can be helpful for

troubleshooting network problems.

NOTE: By default,

trace will automatically

exit after 60 seconds. If

the GUI is configured for

a shorter timeout, the

trace information may

be lost. For more details,

please see “GUI Tab” in

this chapter.

Syntax:

trace [-aefnNpqStvxX] [-c <count>]

[-i <interface>] [-s <snaplen>] [-T <type>]

-F <file> [-P] -w <file> -H <tftp-host>

-D <tftp-path>

Switches enclosed in brackets [] are optional. The -w, -F, -H, and -D

switches are required. A complete listing of the switches for the

trace command is found in the following table.

Example:

The command below TFTPs my.filter from dhcp8/var/

tftpboot/my.filter

to the SA8220, captures five packets

(using the expressions in the

my.filter file), and then writes the

packet information to the

fred.dump file. Because of the -P switch,

the filter file is not deleted.

trace -c 5 -w fred.dump -F my.filter -H dhcp8

-D /var/tftpboot -P

If the -P switch is not used, the filter file is deleted.

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 351 352

Kommentare zu diesen Handbüchern

Keine Kommentare

Hp Traffic Director sa7220 Bedienungsanleitung Seite 135

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Hp Traffic Director sa7220