Hp ProLiant ML350 G4 Server Bedienungsanleitung PDF herunterladen (Seite 55)

Hardware Options Installation 55

SCSI Hard Drive Guidelines

When adding SCSI hard drives to the server, observe the following general

guidelines:

•

A maximum of six SCSI devices per channel can be added.

Each SCSI drive must have a unique ID. The system automatically sets all

SCSI IDs on hot-plug models.

The SCSI ID for each hot-plug hard drive is set automatically to the next

sequential ID number in a series beginning with ID0.

If only one SCSI hard drive is used, install it in the bay with the lowest

number.

Hot-plug SCSI hard drives must be Ultra320. Mixing these types with other

drive standards degrades the overall performance of the drive subsystem.

Installing Hot-Plug SCSI Hard Drives

1. Remove the existing hard drive blank or hard drive from the drive bay.

2. Install the hard drive.

NOTE: Depending on model purchased, the server may look slightly

different than shown.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 155 156

Keine Kommentare

Hp ProLiant ML350 G4 Server Bedienungsanleitung Seite 55