Hp ProLiant BL495c G6 Server-Blade Bedienungsanleitung PDF herunterladen (Seite 10)

Accessing the redundant ROM

If the system ROM is corrupted, the system automatically switches to the redundant ROM in most cases. If

the system does not automatically switch to the redundant ROM, perform the following steps:

1. Power down the server blade (on page 11).

2. Remove the server blade (on page 12).

3. Remove the access panel (on page 12).

4. Change positions 1, 5, and 6 of the system maintenance switch to on.

5. Install the access panel (on page 13).

6. Install the server blade in the enclosure and power up the server blade.

7. After the system beeps, repeat steps 1 through 3.

8. Change positions 1, 5, and 6 of system maintenance switch to off.

9. Repeat steps 5 and 6.

If both the current and backup versions of the ROM are corrupt, return the system board for a service

replacement.

To switch to the backup ROM when the System ROM is not corrupt, use RBSU.

HP c-Class Blade SUV Cable

Item Connector Description

1 Server blade For connecting to the SUV connector on the

server blade front panel

2 Video For connecting a video monitor

3 USB For connecting up to two USB devices

4 Serial For trained personnel to connect a null modem

serial cable and perform advanced diagnostic

procedures

Component identification 10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 89 90

Keine Kommentare

Hp ProLiant BL495c G6 Server-Blade Bedienungsanleitung Seite 10