Hp Integrity Superdome 2 Server Bedienungsanleitung PDF herunterladen (Seite 94)

SET DATE

• Command:

SET DATE MMDDhhmm [[CC]YY][TZ]

• Description:

Sets the date of the complex with the following definitions:

◦ MM: Month

◦ DD: Day

◦ hh: Hour (24-hour time)

◦ mm: Minute

◦ CC: Century

◦ YY: Year

◦ TZ: Time zone

If you leave the time zone variable blank, then the current time zone is left in effect.

• Access level/Bay level:

OA Administrator, OA Operator

• Restrictions:

You must be connected to the monarch OA.◦

◦ Date and time can only be set if NTP is disabled.

◦ MM is an integer from 01 to 12.

◦ DD is an integer from 01 to 31.

◦ hh is an integer from 00 to 24.

◦ mm is an integer from 00 to 60.

◦ For valid time zones, see “Time zone settings” (page 207).

SET NTP PRIMARY

• Command:

SET NTP PRIMARY <ip address>

• Description:

Sets the primary server used for synchronizing time and date using the NTP protocol

• Access level/Bay level:

OA Administrator, OA Operator

• Restrictions:

You must be connected to the monarch OA.◦

◦ The <ip address> must be in the form ###.###.###.###, where each ### ranges

from 0 to 255.

94 Complex management commands

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 216 217

Keine Kommentare

Hp Integrity Superdome 2 Server Bedienungsanleitung Seite 94