Hp Integrity Superdome 2 Server Bedienungsanleitung PDF herunterladen (Seite 26)

SET SESSION TIMEOUT

IMPORTANT: On Superdome 2 systems, the following long-running commands are not immediately

subject to the session timeout defined by the SET SESSION TIMEOUT command:

• SHOW {HR | FPL | LIVELOGS | SEL | SYSLOG | PARTITION CONSOLELOG}

• CONNECT {BLADE | INTERCONNECT | PARTITION }

• CO

• FPL

• SEL

If a user has one of these commands active, their session will not be removed when a session

timeout occurs; instead it will be removed once they exit the long-running command and interact

with the CLI. Furthermore, the SHOW USER SESSIONS command will not display the active session

after a session timeout occurs.

• Command:

SET SESSION TIMEOUT <timeout>

• Description:

Sets the number of minutes before inactive sessions are removed. The default setting is 1440.

The session timeout can be disabled by setting the timeout value to zero.

NOTE: If the session timeout value is lowered, currently inactive sessions may be removed.

• Access level/ Bay level:

OA Administrator

• Restriction:

Valid session timeout values range from 10 to 1440 minutes (24 hours).

SET USER ACCESS

• Command:

SET USER ACCESS "<user name>" {ADMINISTRATOR | OPERATOR | USER}

• Description:

Sets the user access level. Additionally, use the ASSIGN command to give the user access

rights to the Onboard Administrator, server bays, and interconnect bays.

• Access level/Bay level:

OA Administrator

• Restrictions:

None

SET USER CONTACT

• Command:

SET USER CONTACT ["<user name>"] "<contact info>"

• Description:

Sets the contact information field for the user. If there is no <user name>, the command

modifies the contact information of the user who executed the command.

26 User account commands

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 216 217

Keine Kommentare

Hp Integrity Superdome 2 Server Bedienungsanleitung Seite 26