HP EliteDesk 800 G3 Small Form Factor PC (ENERGY STAR) Bedienungsanleitung Seite 119
- Seite / 154
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Control panel message Description Recommended action
RTC (real-time clock) battery may need to
be replaced.
problem persists, replace the RTC battery. See
the Removal and Replacement section for
instructions on installing a new battery.
008–Microcode Patch Error Processor is not supported by the BIOS. 1. Upgrade BIOS to proper version.
2. Change the processor.
009–PMM Allocation Error during MEBx
Download
Memory error during POST execution of the
Management Engine (ME) BIOS Extensions
option ROM.
1. Reboot the computer.
2. Unplug the power cord, re-seat the
memory modules, and reboot the
computer.
3. If the memory conguration was recently
changed, unplug the computer, restore
the original memory conguration, and
reboot the computer.
4. If the error persists, replace the system
board.
00A-Product Information Not Valid The product information programmed into the
system board is missing or invalid.
Use Computer Setup to update this information.
00B-MEBx Module did not checksum correctly Memory error during POST execution of the
Management Engine (ME) BIOS Extensions
option ROM.
1. Reboot the computer.
2. Unplug the power cord, re-seat the
memory modules, and reboot the
computer.
3. If the memory conguration was recently
changed, unplug the power cord, restore
the original memory conguration, and
reboot the computer.
4. If the error persists, replace the system
board.
00C-PMM Deallocation Error during MEBx
Cleanup
Memory error during POST execution of the
Management Engine (ME) BIOS Extensions
option ROM.
1. Reboot the computer.
2. Unplug the power cord, re-seat the
memory modules, and reboot the
computer.
3. If the memory conguration was recently
changed, unplug the power cord, restore
the original memory conguration, and
reboot the computer.
4. If the error persists, replace the system
board.
00D-Setup Error during MEBx Execution MEBx selection or exit resulted in a setup
failure.
1. Reboot the computer.
2. Unplug the power cord, re-seat the
memory modules, and reboot the
computer.
3. If the memory conguration was recently
changed, unplug the power cord, restore
the original memory conguration, and
reboot the computer.
4. If the error persists, replace the system
board.
POST numeric codes and text messages 111
- Maintenance and Service Guide 1
- Safety warning notice 3
- Table of contents 5
- 1 Product features 9
- Front panel components 10
- Rear panel components 11
- Serial number location 12
- 2 Illustrated parts catalog 13
- Misc parts 15
- Cables and adapters 17
- Boards, cards, and ports 17
- Generating static 20
- Grounding the work area 21
- Operating guidelines 22
- Routine care 23
- Service considerations 24
- Cables and connectors 25
- Hard Drives 25
- Lithium coin cell battery 25
- SATA hard drives 26
- SATA hard drive cables 26
- SMART ATA drives 26
- Cable management 27
- Preparation for disassembly 28
- Access panel 29
- Front bezel 29
- Front bezel dust lter 31
- System board connections 32
- Populating DIMM sockets 33
- Removing and installing DIMMs 34
- Expansion card 36
- Expansion card 29 37
- Expansion card 31 39
- Drive positions 40
- Drives 37 45
- Drives 39 47
- Hard drive cage 49
- WLAN module 54
- Air duct 55
- Power supply 57
- Fan sink 59
- Processor 61
- Antennas 62
- Antennas 55 63
- Option port board 65
- Hood lock 66
- Hood sensor 67
- Card reader 68
- Card reader 61 69
- Speaker 63 71
- System board 72
- System board callouts 73
- Computer Setup–Main 77
- Computer Setup—Security 79
- Computer Setup—Advanced 81
- Computer Setup—UEFI Drivers 86
- Safety and comfort 87
- Helpful hints 88
- Solving general problems 89
- Solving general problems 83 91
- Solving power problems 93
- Solving hard drive problems 94
- Solving display problems 97
- Solving display problems 91 99
- Solving audio problems 101
- Solving printer problems 103
- Solving Network Problems 107
- Solving Network Problems 101 109
- Solving memory problems 110
- Solving software problems 117
- Resetting the password jumper 125
- Using Windows tools 131
- Restore and recovery 132
- Guidelines 136
- Backing up your information 136
- Performing a system recovery 137
- A Battery replacement 140
- B Power Cord Set Requirements 143
- Country-Specic Requirements 144
- Nonvolatile memory usage 147
- Questions and answers 149
- D Specications 151
Verwandte Produkte und Handbücher für Nein HP EliteDesk 800 G3 Small Form Factor PC (ENERGY STAR)
(19 Seiten)
(21 Seiten)
(25 Seiten)
(57 Seiten)
(20 Seiten)
(27 Seiten)
(11 Seiten)
(39 Seiten)
(86 Seiten)
(85 Seiten)
(60 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 2.249 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern