HP 100B SFF Spezifikationen PDF herunterladen (Seite 64)

Solving Diskette Problems

Common causes and solutions for diskette problems are listed in the following table.

NOTE: Some computers do not support internal diskette drives. Only USB diskette drives are

supported.

NOTE: You may need to reconfigure the computer when you add or remove hardware, such as an

additional diskette drive. See Solving Hardware Installation Problems on page 70 for instructions.

Diskette drive light stays on.

Cause Solution

Diskette is damaged.

Diskette is incorrectly inserted.

Drive cable is not properly connected.

Diskette drive cannot write to a diskette.

Cause Solution

Diskette is not formatted.

Diskette is write-protected.

Writing to the wrong drive.

Not enough space is left on the diskette.

Diskette is damaged.

Cannot format diskette.

Cause Solution

Disk may be write-protected.

In Microsoft Windows 7, right-click Start, click Explore, and

right-click on a drive. Select Properties then select the Tools

tab. Under Errorchecking click Check Now.

Remove diskette and reinsert.

Reconnect drive cable.

Format the diskette.

1. From Windows Explorer select the disk (A) drive.

2. Right-click the drive letter and select Format.

3. Select the desired options, and click Start to begin

formatting the diskette.

Use another diskette or remove the write protection.

Check the drive letter in the path statement.

1. Use another diskette.

2. Delete unneeded files from diskette.

Replace the damaged disk.

Open the locking device on the diskette.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 103 104

Keine Kommentare

HP 100B SFF Spezifikationen Seite 64