Hp LaserJet Pro M1536dnf MFP SERIES Bedienungsanleitung PDF herunterladen (Seite 139)

To set or change the answer mode, complete the following steps:

1. On the control panel, press the Setup

button.

2. Use the arrow buttons to select the Fax Setup menu, and then press the OK button.

3. Use the arrow buttons to select the Advanced Setup menu, and then press the OK button.

4. Use the arrow buttons to select the Answer Mode menu, and then press the OK button.

5. Use the arrow buttons to select the answer mode, and then press the OK button.

Block or unblock fax numbers

If you do not want to receive faxes from specific people or businesses, you can block as many as 30

fax numbers by using the control panel. When you block a fax number and someone from that number

sends you a fax, the control-panel display indicates that the number is blocked, the fax does not print,

and the fax is not saved in memory. Faxes from blocked fax numbers appear in the fax activity log with

a “discarded” designation. You can unblock blocked fax numbers individually or all at one time.

NOTE: The sender of a blocked fax is not notified that the fax failed.

Complete the following steps to block or unblock fax numbers by using the control panel:

1. On the control panel, press the Fax Menu

button.

2. Use the arrow buttons to select the Receive Options menu, and then press the OK button.

3. Use the arrow buttons to select the Block Junk Faxes menu, and then press the OK button.

4. To block a fax number, use the arrow buttons to select the Add Number option, and then press

the OK button. Enter the fax number exactly as it appears in the header (including spaces), and

then press the OK button. Enter a name for the blocked number, and then press the OK button.

To unblock a single fax number, use the arrow buttons to select the Delete Number option, and

then press the OK button. Use the arrow buttons to select the fax number that you want to delete,

and then press the OK button to confirm the deletions.

To unblock all blocked fax numbers, use the arrow buttons to select the Delete All option, and then

press the OK button. Press the OK button again to confirm the deletions.

Set the number of rings-to-answer

When the answer mode is set to Automatic, the product rings-to-answer setting determines the number

of times the telephone rings before the product answers an incoming call.

If the product is connected to a line that receives both fax and voice calls (a shared line) and that also

uses an answering machine, you might need to adjust the rings-to-answer setting. The number of rings-

to-answer for the product must be greater than the rings-to-answer on the answering machine. This

allows the answering machine to answer the incoming call and record a message if it is a voice call.

When the answering machine answers the call, the product listens to the call and automatically answers

it if it detects fax tones.

The default setting for rings-to-answer is five for the U.S. and Canada, and two for other countries/

regions.

Use the following table to determine the number of rings-to-answer to use.

ENWW Set fax settings 125

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 285 286

Keine Kommentare

Hp LaserJet Pro M1536dnf MFP SERIES Bedienungsanleitung Seite 139