HP Photosmart C4600 Bedienungsanleitung PDF herunterladen (Seite 99)

Solution 1: Incorrect type of paper is loaded in the input tray

Solution: If you have colored paper loaded in the input tray when you align the print

cartridges, the alignment fails. Load unused plain white letter or A4 paper into the

input tray, and then try the alignment again. If the alignment fails again, you might

have a defective print cartridge.

To find support and warranty information, go to the HP Web site at

www.hp.com/

support. If prompted, choose your country/region, and then click Contact HP for

information on calling for technical support.

Cause: Incorrect type of paper was loaded in the input tray.

If this did not solve the issue, try the next solution.

Solution 2: Make sure the protective tape is removed from the print cartridges

Solution: Check each print cartridge. The tape might have been removed from the

copper-colored contacts, but still might cover the ink nozzles. If the tape is still

covering the ink nozzles, carefully remove the tape from the print cartridges. Do not

touch the ink nozzles or the copper-colored contacts.

1 Copper-colored contacts

2 Plastic tape with pink pull tab (must be removed before installing)

3 Ink nozzles under tape

Remove and then reinsert the print cartridges. Verify that they are fully inserted and

locked in place.

Cause: Protective tape was covering the print cartridges.

If this did not solve the issue, try the next solution.

Errors 97

Solve a problem

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 135 136

Keine Kommentare

HP Photosmart C4600 Bedienungsanleitung Seite 99