7. Unhook three more claws by pressing in or squeezing, at the indicated locations (1),
working up from the bottom, to remove the cover (2) from the printer.
Figure 6-9.
Left front cover removal (3 of 3)
Right cover removal
1. Open the rear output bin and the upper rear door.
2. Remove three screws (1).
3. Pull down and out on the bottom edge of the cover (2) to release two claws, then pull out
on the front edge (3) to release the additional claws and remove the cover (4).
Figure 6-10.
Right cover removal
ENWW Covers 213
Kommentare zu diesen Handbüchern