HP ZBook 15 Base Model Mobile Workstation Bedienungsanleitung PDF herunterladen (Seite 95)

USB board

Description Spare part number

USB board (includes cable and double-sided adhesive) 734293-001

Before removing the USB board, follow these steps:

1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect the power from the computer by unplugging the power cord from the computer.

3. Disconnect all external devices from the computer.

4. Remove the battery (see

Battery on page 50), and then remove the following components:

a. Service cover (see

Service cover on page 51)

b. Hard drive (see

Hard drive on page 52)

c. Optical drive (see

Optical drive on page 54)

d. Keyboard (see

Keyboard on page 62)

e. Top cover (see

Top cover on page 71)

Remove the USB board:

1. Release the ZIF connector (1) to which the USB board cable is attached, and then disconnect the

USB board cable from the system board.

2. Detach the USB board cable (2) from the base enclosure. (The USB board cable is attached to the

base enclosure with double-sided adhesive.)

Component replacement procedures

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 159 160

Keine Kommentare

HP ZBook 15 Base Model Mobile Workstation Bedienungsanleitung Seite 95