HP EliteBook Folio 9480m Notebook PC Bedienungsanleitung PDF herunterladen (Seite 121)

15 Statement of Volatility

The purpose of this document is to provide general information regarding non-volatile memory in industry-

standards based HP Business Notebook PC systems and provide general instructions for restoring nonvolatile

memory that can contain personal data after the system has been powered o and the hard drive has been

removed.

HP Business Notebook PC products that use Intel®-based or AMD®-based system boards contain volatile DDR

memory. The amount of nonvolatile memory present in the system depends upon the system conguration.

Intel-based and AMD-based system boards contain nonvolatile memory subcomponents as originally shipped

from HP assuming that no subsequent modications have been made to the system and assuming that no

applications, features, or functionality have been added to or installed on the system.

Following system shutdown and removal of all power sources from an HP Business Notebook PC system,

personal data can remain on volatile system memory (DIMMs) for a nite period of time and will also remain

in nonvolatile memory. The steps below will remove personal data from the notebook PC, including the

nonvolatile memory found in Intel-based and AMD-based system boards. Some of these steps are disclosed

in the Maintenance & Service Guides available for HP PC products available on the product support pages at

www.hp.com.

1. Follow steps (a) through (I) below to restore the nonvolatile memory that can contain personal data.

Restoring or re-programming nonvolatile memory that does not store personal data is neither

necessary nor recommended.

a. Enter BIOS (F10) Setup by powering on the system and pressing F10 when prompted near the

bottom of the display, or press the ESC key to display the start up menu, then press F10 . If the

system has a BIOS administrator password, enter the password at the prompt.

b. Select the File menu, then Restore Defaults.

c. Select the System Conguration menu, then Restore Security Defaults.

d. If an asset or ownership tag is set, select the Security menu and scroll down to the Utilities menu.

Select System IDs, and then select the tag that has been set. Press the spacebar once to clear the

tag, then press Enter to return to the prior menu.

e. If a DriveLock password is set, select the Security menu, scroll down to DriveLock, then select

DriveLock password. Select the desired hard drive. Click Disable protection, enter the existing

master DriveLock password, then press Enter to conrm and return to the prior menu. Repeat this

procedure if more than one hard drive has a DriveLock password.

f. If an Automatic DriveLock password is set, select the Security menu, scroll down to Automatic

DriveLock, then select the desired hard drive and disable protection. Repeat this procedure if more

than one hard drive has an Automatic DriveLock password.

g. Select the File menu, then Reset BIOS Security to factory default. Click yes at the warning

message.

h. Select the File menu, then Save Changes and Exit.

i. Reboot the system. If the system has a Trusted Platform Module (TPM) and/or ngerprint sensor,

one or two prompts will appear. One to clear the TPM and the other to Reset Fingerprint Sensor;

press F1 to accept or F2 to reject.

If the HP notebook model number ends in a ‘p’ or ‘w’ and includes Intel® Centrino with VProTM,

reboot the PC and enter BIOS Setup by pressing F10 when prompted. Select System Conguration,

109

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 135 136

Kommentare zu diesen Handbüchern

Keine Kommentare

HP EliteBook Folio 9480m Notebook PC Bedienungsanleitung Seite 121

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Notebooks HP EliteBook Folio 9480m Notebook PC