Hp LXR 8000 Bedienungsanleitung PDF herunterladen (Seite 39)

HP NetServer Installation Guide 25

NOTE The Client LAN IP addresses and Intra-cluster LAN IP addresses must be on different

subnets.

5. Once the NT installation is complete, the D5013A NIC drivers must be manually set to the correct LAN

speed. Log on and from the start menu select: Settings, Control Panel, Network, and

Adapters. For each D5013A adapter, select Properties then Settings and set the network

speed to the appropriate setting (either 10 Mbps or 100 Mbps) for your network. The intra-cluster LAN

should be set to 100 Mbps. Do not use the Auto setting.

LX/LXr Pro

Configure NetServer Hardware and BIOS

1. Make sure you power down System A and power up System B.

2. Insert the HP NetServer Navigator CD in the CD-ROM drive of System B and restart the server.

The server boots from the CD and displays the Navigator Main menu.

NOTE If prompted that the HP NetServer Navigator BIOS is a newer version, choose

Continue and go to step 3; otherwise go to step 6.

3. To update the BIOS, choose Configuration Assistant, then Custom, Microsoft, MS

Windows NT 4.0 Enterprise Edition, and No for automated NOS installation.

4. Select Update, then Execute. Follow screen prompts to update the BIOS.

5. After the server reboots return to the Navigator main menu by clicking the Back button twice on the

displayed window.

6. From the Navigator Main menu, choose NetServer Utilities, then EISA Configuration

Utility.

7. At the Utility window select Step 3 - View or Edit Details and:

•

Make sure MP Spec Version is set to V1.4.

•

Disable the on-board IDE Hard Disk Controller by scrolling to On-board IDE Hard Disk

Controller, pressing Enter, and choosing Disable.

The embedded IDE controller is not used on the HP NetServer LX and LXr Pro.

8. Save and exit the EISA Configuration Utility.

The utility saves the configuration data, restarts the server, and reloads the HP NetServer Navigator CD.

9. Install a utility partition on the local storage disk by choosing Configuration Assistant, then

Custom, Microsoft, MS Windows NT 4.0 Enterprise Edition, and No for automated

NOS installation.

10. Choose Install/Update Utility Partition.

When finished, the system reboots and displays the Custom Configuration window.

Install Windows NT

1. Remove the HP NetServer Navigator CD, insert the first CD of the Microsoft Windows NT Server,

Enterprise Edition, and exit Navigator to reboot the server.

2. Select the following options when prompted:

• Choose the unpartitioned space and install Windows NT.

• Choose NTFS file system

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 94 95

Keine Kommentare

Hp LXR 8000 Bedienungsanleitung Seite 39