Hp LXR 8000 Bedienungsanleitung PDF herunterladen (Seite 25)

HP NetServer Installation Guide 11

4 Cluster Cabling and Setup

Setup Cluster Hardware

Non-racked clusters - Follow the Site Preparation guidelines provided in the Planning Guide under Plan on

the HP NetServers Clustering Solutions web site.

Racked clusters - Follow the Road Map supplied with the system and instructions in the shared storage

supplement. In addition you should have rack layouts of your system printed from the HP NetServers Rack

Assistant program. If not, see HP NetServers web site to download this program.

Connect the LAN Adapters

Two sets of LAN adapters need to be connected. One set allows the cluster to communicate node-to-node

over what is typically called the intra-cluster LAN. The second set allows the cluster to communicate with

external clients over what is typically called the client LAN.

NOTE See the Configuration Guide for your cluster for the PCI slots to be used for the intra-

cluster and client LANs.

To connect the cluster’s LAN adapters:

1. Connect the intra-cluster LAN adapter in one node to the intra-cluster LAN adapter in the other node

using a crossover cable.

2. Connect the client LAN adapter in each node to the client LAN using Ethernet cables.

Connect Shared Storage & Cable the Cluster

part "4 Cluster Cabling and Setup" in the Shared Storage Supplement

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 94 95

Keine Kommentare

Hp LXR 8000 Bedienungsanleitung Seite 25