Hp ProLiant DL320e Gen8 v2-Server Bedienungsanleitung PDF herunterladen (Seite 7)

Component identification 7

Front panel LEDs and buttons

Item Description Status

Health LED Solid green = Normal

Flashing amber = System degraded

Flashing red (1 Hz/cycle per sec) = System critical

Fast-flashing red (4 Hz/cycles per sec) = Power fault*

NIC status LED Solid green = Link to network

Flashing green (1 Hz/cycle per sec) = Network active

Off = No network activity

UID button/LED Solid blue = Activated

Flashing blue (1 Hz/cycle per sec) = Remote management or firmware

upgrade in progress

Off = Deactivated

Power On/Standby button

and system power LED

Solid green = System on

Flashing green (1 Hz/cycle per sec) = Performing power on sequence

Solid amber = System in standby

Off = No power present**

* To identify components in a degraded or critical state, see the iLO/BIOS logs and the server troubleshooting guide.

** Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has

occurred, or the power button cable is disconnected.

Rear panel components

Item Description

Slot 2 PCIe3 x8 (4, 1)

Slot 1 PCIe3 x16 (8, 4, 1)

Integrated power supply

NIC 1/shared iLO 4 connector

Video connector

NIC connector 2

USB 3.0 connectors

Dedicated iLO 4 connector

USB 2.0 connectors

1 2 3 4 5 6 7 8 9 10 11 12 ... 99 100

Keine Kommentare

Hp ProLiant DL320e Gen8 v2-Server Bedienungsanleitung Seite 7