Hp ProLiant DL320e Gen8 v2-Server Bedienungsanleitung PDF herunterladen (Seite 36)

100

Hardware options installation 36

Install the drive in the carrier.

6. Install the drive.

CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless

all bays are populated with either a component or a blank.

7. Connect the power cord to the server.

8. Connect the power cord to the power source.

9. Power up the server (on page 14).

To configure arrays, see the HP Smart Storage Administrator User Guide on the HP website

(http://www.hp.com/go/smartstorage/docs).

Installing a hot-plug drive

CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless

all bays are populated with either a component or a blank.

To install the component:

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 99 100

User Guide 1
Contents 3
Contents 4 4
Contents 5 5
Component identification 6
Front panel LEDs and buttons 7
Rear panel components 7
Rear panel LEDs and buttons 8
System board components 9
DIMM slot locations 10
System maintenance switch 10
Drive numbering 11
FBWC module LED definitions 12
Fan locations 13
Operations 14
Install the access panel 17
Remove the access panel 17
Remove the air baffle 18
Install the air baffle 19
Remove the PCI riser cage 19
Install the PCI riser cage 20
Optimum environment 22
Temperature requirements 23
Server warnings and cautions 24
Rack warnings 25
Installing hardware options 26
Registering the server 29
Setup 31 31
Completing the switch setup 33
Introduction 34
Security bezel option 34
Drive options 34
Installing a hot-plug drive 36
Controller options 37
Optical drive option 42
Memory options 45
ECC memory 46
Installing a DIMM 47
Expansion board options 48
Cabling 55
Item Description 59
Optical drive cabling 60
Power supply cabling 61
Internal USB cabling 63
Front I/O board cabling 63
Server mode 64
HP product QuickSpecs 64
HP iLO Management Engine 64
Active Health System 65
Intelligent Provisioning 66
HP Insight Diagnostics 67
Erase Utility 67
HP Service Pack for ProLiant 68
HP ROM-Based Setup Utility 69
Auto-configuration process 70
Boot options 70
Utilities and features 71
ROMPaq utility 72
Automatic Server Recovery 72
USB support 72
Keeping the system current 73
ProLiant servers 74
Troubleshooting 75
System battery replacement 76
Regulatory information 78
Warranty information 79
Electrostatic discharge 80
Specifications 81
Specifications 83 83
Support and other resources 84
Customer Self Repair 86
Reparo feito pelo cliente 88
Acronyms and abbreviations 92
Documentation feedback 96
Index 97 97
Index 98 98
Index 99 99
Index 100 100

Kommentare zu diesen Handbüchern

Keine Kommentare

Hp ProLiant DL320e Gen8 v2-Server Bedienungsanleitung Seite 36

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Hp ProLiant DL320e Gen8 v2-Server