HP Stream - 14t-ax000 CTO Bedienungsanleitung PDF herunterladen (Seite 37)

Heat sink

Description Spare part number

Heat sink 907105-001

Before removing the heat sink, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet and then

unplugging the AC adapter from the computer.

4. Remove the bottom cover (see Bottom cover on page 23).

5. Disconnect the battery cable from the system board (see Battery on page 24).

Remove the heat sink:

1. Remove the two Phillips broad head PM2.0×2.0 screws (1) that secure the heat sink to the system

board.

2. Lift the heat sink o the system board (2).

NOTE: The thermal material must be thoroughly cleaned from the surfaces of the heat sink and the system

board each time the heat sink is removed. Thermal material is used on the processor (1) and the heat sink

section (2) that services it.

Component replacement procedures 29

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 68 69

Keine Kommentare

HP Stream - 14t-ax000 CTO Bedienungsanleitung Seite 37