HP ElitePad 1000 G2 Tablet Bedienungsanleitung PDF herunterladen (Seite 52)

3. Remove the slot cover (4) by pressing it through the bottom cover.

4. Remove the slot cover.

Reverse this procedure to install the slot cover.

Docking connector cable

Description Spare part number

Docking connector cable (includes double-sided adhesive) 747631-001

Before removing the docking connector cable, follow these steps:

1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and

then shut it down through the operating system.

2. Disconnect the power from the tablet by unplugging the power cord from the tablet.

3. Disconnect all external devices from the tablet.

4. Remove the display assembly (see

Display assembly on page 19), and then remove the

following components:

a. WWAN module (see

WWAN module on page 26)

b. Power button board (see

Power button board on page 32)

c. Battery (see

Battery on page 39)

d. System board (see

System board on page 40)

Remove the docking connector cable:

46 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 72 73

Keine Kommentare

HP ElitePad 1000 G2 Tablet Bedienungsanleitung Seite 52