HP ElitePad 1000 G2 Tablet Bedienungsanleitung PDF herunterladen (Seite 40)

Volume button board

Description Spare part number

Volume button board (includes bracket and cable) 759031-001

Before removing the volume button board, follow these steps:

1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and

then shut it down through the operating system.

2. Disconnect the power from the tablet by unplugging the power cord from the tablet.

3. Disconnect all external devices from the tablet.

4. Remove the display assembly (see

Display assembly on page 19).

Remove the volume button board:

1. Disconnect the volume button board cable (1) from the power button board.

2. Release the volume button board cable from the retention clips (2) built into the battery.

3. Remove the two Phillips PM1.5×2.0 screws (3) that secure the volume button board to the

bottom cover.

4. Remove the volume button board (4) and cable.

NOTE: In the process of removing the volume button board, the volume button actuator may be

accidentally dislodged from the bottom cover. To replace the volume button actuator, refer to the following

illustration.

The volume button actuator is included in the Button Kit, spare part number 747634-001.

34 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 72 73

Keine Kommentare

HP ElitePad 1000 G2 Tablet Bedienungsanleitung Seite 40