Hp 6627A Bedienungsanleitung PDF herunterladen (Seite 111)

Error Codes and Messages 111

Table D-2. ERROR Responses (continued)

Error Code

(ERR? query)

Message

(ERR key)

Explanation

17 UNCALIBRATED Unexplained EEPROM error; possibly as the result of incorrect calibration

procedure. Recalibrate as described in Appendix A. If the problem persists, a

hardware failure exists (Refer to the Troubleshooting Section in the Service

Manual).

18 CAL LOCKED Calibration was attempted with the calibration jumper on the HP-IB board in

the lockout position (See Chapter 4 in the Service Manual). Reposition the

jumper and re-calibrate if this is desired.

22 SKIP SLF TST The self test jumper on the HP-IB board is in the Skip Self Test Position (See

Chapter 4 in the Service Manual). Reposition the jumper and carry out self-test

if this is desired.

Table D-3. TEST? Responses

Response Code

(TEST? query)

Explanation

0 No errors were detected.

20 The timer on the HP-IB board failed self test. Refer to the Troubleshooting Section in the Service

Manual.

21 The RAM on the HP-IB board failed self test. Refer to the Troubleshooting Section in the Service

Manual. Note that if this failure occurred at power-on, it cannot be displayed on the front panel.

27 The ROM on the HP-IB board failed self test. Refer to the Troubleshooting Section in the Service

Manual. Note that if this failure occurred at power-on, it cannot be displayed on the front panel.

1 2 ... 106 107 108 109 110 111 112 113 114 115

Keine Kommentare

Hp 6627A Bedienungsanleitung Seite 111