Hp 288048 Bedienungsanleitung PDF herunterladen (Seite 7)

Installation

311053C 7

Mount Gun

Reciprocating Arm Rod Mount

Manifolds 241161 and 241162

To mount the gun on a reciprocating arm rod [0.5 in. (13

mm) diameter maximum]:

1. Insert the mounting bar (A) through the hole in the

manifold as shown in F

IG. 3.

2. Secure the gun to the bar by tightening the mount-

ing screw (B).

3. Ensure the tip of the gun is 8 to 10 in. (150 to 200

mm) from the surface of the object being sprayed.

Stationary Support Mount

All Manifolds

To mount the gun on a stationary support (refer to F

IG.

4. and Mounting Hole Layout, page 28):

1. Attach the gun to the support with two M5 x 0.8 cap-

screws (C). The screws must be long enough to

engage the threaded holes in the gun manifold to a

depth of 1/4 in. (6 mm).

2. Ensure the tip of the gun is 8 to 10 in. (150 to 200

mm) from the surface of the object being sprayed.

Use the 1/8 in. alignment pin (P) to assist in

orienting the gun.

IG. 3: Reciprocating Arm Mount

TI8111a

IG. 4: Stationary Support Mount

TI8112a

1 2 3 4 5 6 7 8 9 10 11 12 ... 29 30

Keine Kommentare

Hp 288048 Bedienungsanleitung Seite 7