Hp Tape Library Interface Manager Software Bedienungsanleitung PDF herunterladen (Seite 47)

Chapter 3 Management Operations 47

Chapter 3

Placing a Fibre Channel Interface Card On-Line Using Telnet

To replace a Fibre Channel interface card with a new one, do the following:

1. BEFORE installing the interface card into the Interface Manager, attach the

SCSI cable that was removed from the old card, to the correct bus on the

new card based on the connections printed on the cable label.

2. Insert the new FC interface card into the slot where the old card was

removed. Gently push the card into the slot by placing pressure on the top

AND bottom of the card until it is flush with the chassis. (Pushing the card

in from the top OR bottom alone may damage the card or Interface

Manager (see Figure 7).

Figure 7 Installing a Fibre Channel Interface Card into the Interface Manager

3. Log into the IM via a Telnet session as described in Accessing Telnet on

page 38.

4. Select [3] from the Main menu.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 137 138

Keine Kommentare

Hp Tape Library Interface Manager Software Bedienungsanleitung Seite 47