Hp Surestore Disk Array 12h and FC60 Bedienungsanleitung Seite 144

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 466
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 143
144 Overview
Overview
This chapter explains how to install the Disk Array FC60 enclosures into a cabinet and
how to configure and connect the controller enclosure to the disk enclosures. It also
covers the Fibre Cable connection to the host. Finally this chapter provides power up
instructions and initial software installation requirements for operation of the disk array.
Before installing the Disk Array FC60, the topology and array configuration should be
established. See Chapter 2, Topology and Array Planning for information on these topics.
The Disk Array FC60 is designed to be installed in the following HP cabinets:
Legacy (also referred to as original) HP cabinets (1.1m, 1.6m, and 2m)
System/E Rack (which includes A490xA/J150xA: 1.1m, 1.6m, and 2m)
Installation consists of the following procedures:
Preparing the site
Installing PDUs
Installing disk enclosures
Installing the controller enclosure
Setting configuration switches
Attaching power cords
Attaching SCSI cables and configuring the disk enclosure switches
Connecting Fibre Channel cables
Powering Up the Array
Verifying Disk Array Connection
Installing the Disk Array Management Software
Seitenansicht 143
1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 465 466

Kommentare zu diesen Handbüchern

Keine Kommentare