Hp StorageWorks XP10000 Disk Array Bedienungsanleitung PDF herunterladen (Seite 114)

Figure 61 Ping pane

3. From the From (Subsystem Port) list, select an iSCSI port.

4. In To (IP Address) box, enter the host's IP address.

5. Click OK.

A ping command is issued from the iSCSI port to the host ﬁve times. After the ping command is

issued ﬁve times, the Ping Status pane appears and displays the results of the ﬁrst to ﬁfth attempts at

issuing the ping command. The results appear in the order attempts were made.

Figure 62 Ping Status pane

6. On the Ping Status pane, check the results of the ping command.

• If the host responded to the ping command, the Status column displays Success.

• If the host did not respond to the ping command, the Status column displays Error.

•TheSuccess Rate ﬁeld displays the ping command's success rate. If the host responds to each

of the ﬁve ping attempts, the success rate is 100 percent. If the host responds three times out

of ﬁve ping attempts, the success rate is 60 percent.

7. Click OK.

8. To issue a ping command, return to step 3.

Otherwise, click Cancel.

TIP:

You can issue a ping command from an iSCSI port to an iSNS server. To verify connectivity

between an iSNS server and the array, issue a ping command to the iSNS server. If the

iSNS responds to the ping command, the iSNS server and array can communicate with

each other.

114 LUN Manager operations

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 219 220

Keine Kommentare

Hp StorageWorks XP10000 Disk Array Bedienungsanleitung Seite 114