Hp MPX200 Multifunction Router Bedienungsanleitung PDF herunterladen (Seite 249)

G Saving and restoring the MPX200 configuration

The MPX200 conguration information is saved as a .bin or .tgz le, depending on the method

used to restore the MPX200 persistent data. The MPX200 conguration information is saved and

restored using the MPX200 CLI commands or HP Command View EVA (see “ Saving or restoring

the MPX200 configuration” (page 37)).

NOTE: As with any important database, the MPX200 persistent data should be saved periodically

to avoid data loss from hardware or software errors. It is also important to save the conguration

information before replacing the MPX200.

Saving the configuration using MPX200 CLI

Using the MPX200 CLI to save the conguration information places the le in the MPX200’s FTP

directory. You must then move the le using FTP from the MPX200 (an FTP client accesses the file

and moves it to any desired location).

To save the conguration using the MPX200 CLI:

1. Log in to the MPX200 using a Telnet session to the management port or the console port:

Username: guest

Password: password

2. Enter the following command:

MPX200> admin start

3. Enter config as the password.

4. Enter the following command:

MPX200 (admin) #> fru save

FRU save completed. Configuration File is HP_Storage-

Works_MPX200_FRU.bin. Please use FTP to extract the file out from the

System.

MPX200 (admin) #>

NOTE: The FRU save creates a bin file containing the router persistent data, configuration,

and LUN mappings. The file is stored in the router directory /var/ftp. You must then FTP

the tar file from the router.

5. Establish an FTP connection to the MPX200 management port and log in:

Username: ftp

Password: ftp

6. Enter the following command to set the FTP transfer type to Binary:

ftp> bin

7. Enter the following command to access the HP_StorageWorks_MPX200_FRU.bin file:

ftp> get HP_StorageWorks_MPX200_FRU.bin

Restoring the configuration using MPX200 CLI

There are two options for restoring configurations on the MPX200:

• Full Configuration Restore, which fully restores the router’s configuration (all configuration

parameters and LUN mappings)

• Partial Restore (Mappings), which restores only the LUN mappings

The restored configuration takes effect after the router is rebooted.

To restore the configuration using MPX200 CLI:

1. Establish an FTP connection to the MPX200 management port and log in:

Username: ftp

Password: ftp

Saving the configuration using MPX200 CLI 249

1 2 ... 244 245 246 247 248 249 250 251 252 253 254 ... 257 258

Kommentare zu diesen Handbüchern

Keine Kommentare

Hp MPX200 Multifunction Router Bedienungsanleitung Seite 249

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Lager Hp MPX200 Multifunction Router