Hp Virtual Connect Enterprise Manager Software Bedienungsanleitung PDF herunterladen (Seite 26)

Virtual Connect 2.3x features that must be disabled in a VC Domain to be part of the VC Domain

Group with Virtual Connect firmware 2.1x

IMPORTANT: If you plan to add Virtual Connect 2.3x to a VC Domain Group with Virtual Connect firmware

2.0, you must disable the Virtual Connect 2.3x features in this section and the Virtual Connect 2.1x features

in the following section.

• Enhanced SNMP configuration is not supported.

Figure 3-2 Enhanced SNMP configuration

Do not configure the VC Domain using the enhanced SNMP configuration. If necessary, disable the

enhanced SNMP configuration by following these steps:

1. Do not configure more than five SNMP trap destinations.

2. Verify that all SNMP trap destinations follow these rules:

a. The Destination Name must be in the following format:

<IP Address of the SNMP Trap Destination>_<Community String>_<0 for

VC-Enet and 1 for VC-FC>

(for example, 192.168.1.1_public_1)

b. Select the “ipv4” option.

c. Set the SNMP trap format to “SNMPv1.”

Figure 3-3 Adding or editing a compatible SNMP trap destination

26 Managing VC Domains

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 110 111

Keine Kommentare

Hp Virtual Connect Enterprise Manager Software Bedienungsanleitung Seite 26