HP Vectra VE5 2 Betriebsanweisung PDF herunterladen (Seite 55)

Setup Item Default* Action

Memory and Cache

Memory caching

Both Controls internal (L1) and external (L2) memory

caching.

Memory hole Disabled Sets a 1 MB memory hole between 15 MB and

16 MB if needed. You need at least 16 MB for

this option to be available.

Shadow/Cache ISA Option

ROMs

Disabled Enables shadowing and caching for ISA "Non

PnP" Option ROMs for region X-Y, in order to

improve performance. Note that some Option

ROMs cannot be shadowed.

Hard Disk Drives

Hard disk drive 0

(xxxx MB)

Hard disk drive 1

(xxxx MB)

Hard disk drive 2

(xxxx MB)

Hard disk drive 3

(xxxx MB)

642 MB

xxx MB

Configure IDE drive 0. It is not recommended to

connect a CD-ROM on a channel which already

has an IDE hard disk drive.

ub-menu items for each of these fields are

given after “On-board Bus IDE adapters” in this

table.

Translation method Extended Select “Standard” only if you are running a UNIX

Operating System.

On-board Bus IDE

adapters

Both Enable or disable the on-board IDE

adapters.“Primary” enables only the HDD data

cable (marked “HDD” next to the system board

attachment).

“Both” enables the HDD data cable and the CD-

ROM data cable (marked “CD-ROM” next to the

system board attachment).

Autotype fixed disk Automatically attempts to detect and identify the

IDE drive when you press the Enter key.

Type User 642 MB Select “Auto” for automatic hard disk drive

detection. (To initiate automatic hard disk

detection, press the Enter key at the “Autotype

fixed disk” item). “User” allows you to edit all the

detected parameters. Select “CD” if drive is an

IDE CD-ROM, and “None” if there is no drive.

Cylinders* 944 Sets the number of hard disk drive cylinders.

Heads* 14 Sets the number of hard disk drive heads.

Sectors/Track* 40 Sets the number of hard disk drive sectors per

track.

Multi-sector transfers* 8 sectors Determines the number of sectors per block for

multiple sector transfers.

LBA mode control* Enabled Enable or disable Logical Block Addressing

mode in place of Cylinder Heads Sectors.

32 bit I/O Enabled Enable or disable 32 bit data transfer.

Transfer mode*

* Only available if “User”

mode has been selected

as “Type”.

PI0 mode 3 Selects the hard disk drive transfer mode and

data transfer rate.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 101 102

Kommentare zu diesen Handbüchern

Keine Kommentare

HP Vectra VE5 2 Betriebsanweisung Seite 55

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software HP Vectra VE5 2