HP EVA6400 Array Bedienungsanleitung Seite 60
- Seite / 150
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
To perform LUN rediscovery after configuring the LUNs, use the following command:
/opt/QLogic_Corporation/drvutil/qla2300/qlreconfig –d qla2300 -s
8. Reboot the server to implement the changes to the configuration files.
NOTE: The qla2300 driver is not supported for Oracle StorEdge Traffic Manager/Sun Storage
Multipathing. To configure a QLogic FCA using the Oracle SAN driver stack, see “Configuring
FCAs with the Oracle SAN driver stack” (page 56).
Fabric setup and zoning
To set up the fabric and zoning:
1. Verify that the Fibre Channel cable is connected and firmly inserted at the array ports, host
ports, and SAN switch.
2. Through the Telnet connection to the switch or Switch utilities, verify that the WWN of the
EVA ports and FCAs are present and online.
3. Create a zone consisting of the WWNs of the EVA ports and FCAs, and then add the zone
to the active switch configuration.
4. Enable and then save the new active switch configuration.
NOTE: There are variations in the steps required to configure the switch between different
vendors. For more information, see the HP SAN Design Reference Guide, available for downloading
on the HP website: http://www.hp.com/go/sandesign.
Oracle StorEdge Traffic Manager (MPxIO)/Oracle Storage Multipathing
Oracle StorEdge Traffic Manager (MPxIO)/Sun Storage Multipathing can be used for FCAs
configured with the Oracle SAN driver depending on the operating system version, architecture
(SPARC/x86), and patch level installed. For configuration details, see the HP MPxIO application
notes, available on the HP support website: http://www.hp.com/support/manuals.
NOTE: MPxIO is included in the SPARC and x86 Oracle SAN driver. A separate installation of
MPxIO is not required.
In the Search products box, enter MPxIO, and then click the search symbol. Select the
application notes from the search results.
Configuring with Veritas Volume Manager
The Dynamic Multipathing (DMP) feature of Veritas Volume Manager (VxVM) can be used for all
FCAs and all drivers. EVA disk arrays are certified for VxVM support. When you install FCAs,
ensure that the driver parameters are set correctly. Failure to do so can result in a loss of path
failover in DMP. For information about setting FCA parameters, see “Configuring FCAs with the
Oracle SAN driver stack” (page 56) and the FCA manufacturer’s instructions.
The DMP feature requires an Array Support Library (ASL) and an Array Policy Module (APM). The
ASL/APM enables Asymmetric Logical Unit Access (ALUA). LUNs are accessed through the primary
controller. After enablement, use the vxdisk list <device> command to determine the
primary and secondary paths. For VxVM 4.1 (MP1 or later), you must download the ASL/APM
from the Symantec/Veritas support site for installation on the host. This download and installation
is not required for VxVM 5.0 or later.
To download and install the ASL/APM from the Symantec/Veritas support website:
1. Go to http://support.veritas.com.
2. Enter Storage Foundation for UNIX/Linux in the Product Lookup box.
3. Enter EVA in the Enter key words or phrase box, and then click the search symbol.
4. To further narrow the search, select Solaris in the Platform box.
5. Read TechNotes and follow the instructions to download and install the ASL/APM.
60 Configuring application servers
- User Guide 1
- Contents 3
- 4 Contents 4
- Contents 5 5
- 6 Contents 6
- Contents 7 7
- 8 Contents 8
- 1 EVA6400/8400 hardware 9
- I/O modules 10
- Copper Fibre Channel cables 12
- Fibre Channel disk drives 12
- Controller enclosures 13
- Operator control panel 14
- Status indicators 15
- Power supplies 16
- Blower module 17
- Battery module 17
- HSV controller cabling 18
- Storage system racks 19
- 20 EVA6400/8400 hardware 20
- 5. Power cord2. PDU A 21
- 3. AC receptacles 21
- 4. Circuit breakers2. PDU A 22
- 22 EVA6400/8400 hardware 22
- Rack AC power distribution 23
- Moving and stabilizing a rack 25
- 2. Leveler foot1. Hex nut 26
- 26 EVA6400/8400 hardware 26
- Direct connect 28
- Fabric connect iSCSI 29
- Direct connect iSCSI 29
- Gathering information 30
- Entering the WWN 31
- Entering the WWN checksum 32
- 3 EVA6400/8400 operation 34
- 36 EVA6400/8400 operation 36
- Implicit LUN transition 39
- Starting the storage system 40
- Creating disk groups 42
- Handling fiber optic cables 43
- Using the OCP 43
- Displaying system information 44
- Shutting down the system 45
- Shutting the controller down 46
- Restarting the system 46
- Uninitializing the system 46
- Password options 47
- Changing a password 47
- Clearing a password 47
- Overview 48
- Clustering 48
- Multipathing 48
- Adding hosts 49
- Scanning the bus 50
- Accessing IBM AIX utilities 51
- HBA drivers 52
- Channel FCA firmware 53
- Console LUN ID and OS unit ID 53
- Adding OpenVMS hosts 54
- Oracle Solaris 57 57
- Oracle Solaris 59 59
- Fabric setup and zoning 60
- Oracle Solaris 63 63
- Configuring an ESX server 64
- VMware 65 65
- Specifying DiskMaxLUN 66
- Verifying connectivity 66
- System prerequisites 67
- Installing the VAAI Plug-in 68
- VMware 69 69
- VMware 71 71
- VMware 73 73
- Uninstalling the VAAI Plug-in 74
- Windows 75 75
- 5 Customer replaceable units 76
- Replaceable parts 77
- Replacement instructions 79
- 6 Support and other resources 80
- Typographic conventions 81
- Rack stability 82
- Customer self repair 82
- FCC rating label 83
- European Union notice 84
- Japanese notices 85
- Korean notices 85
- Taiwanese notices 86
- Turkish recycling notice 86
- Laser compliance notices 87
- German laser notice 88
- Italian laser notice 88
- Japanese laser notice 88
- Recycling notices 89
- Bulgarian recycling notice 90
- Czech recycling notice 90
- Danish recycling notice 90
- Dutch recycling notice 90
- Estonian recycling notice 91
- Finnish recycling notice 91
- French recycling notice 91
- German recycling notice 91
- Greek recycling notice 92
- Hungarian recycling notice 92
- Italian recycling notice 92
- Latvian recycling notice 92
- Lithuanian recycling notice 93
- Polish recycling notice 93
- Portuguese recycling notice 93
- Romanian recycling notice 93
- Battery replacement notices 94
- French battery notice 95
- German battery notice 95
- Italian battery notice 96
- Japanese battery notice 96
- Spanish battery notice 97
- B Error messages 98
- C Controller fault management 107
- Fault management displays 108
- ◦ 06—The creation month 109
- ◦ 05—The creation date 109
- Rack specifications 110
- UPS Selection 111
- Airflow and Recirculation 111
- Configuration Standards 111
- E Single Path Implementation 115
- Installation requirements 116
- Recommended mitigations 116
- Supported configurations 116
- HP-UX configuration 118
- Limitations 119
- Requirements 119
- HBA configuration 120
- Oracle Solaris configuration 122
- Tru64 UNIX configuration 123
- OpenVMS configuration 125
- Linux (32-bit) configuration 126
- Linux (64-bit) configuration 127
- IBM AIX configuration 129
- VMware configuration 130
- Failure scenarios 131
- Windows Server 132
- Oracle Solaris 132
- OpenVMS and Tru64 UNIX 133
- Glossary 136
- 138 Glossary 138
- 140 Glossary 140
- 142 Glossary 142
- 144 Glossary 144
- 146 Glossary 146
- 148 Index 148
- 150 Index 150
Verwandte Produkte und Handbücher für Software HP EVA6400 Array
Software HP ISCSI SR2122 Bedienungsanleitung
(66 Seiten)
(66 Seiten)
Software HP 8/20q Bedienungsanleitung
(108 Seiten)
(108 Seiten)
Software HP R4.2 Bedienungsanleitung
(745 Seiten)
(745 Seiten)
Software HP xw2x220c Betriebsanweisung
(110 Seiten)
(110 Seiten)
Software HP A3100-24 Bedienungsanleitung
(157 Seiten)
(157 Seiten)
Software HP DesignJet 500ps Bedienungsanleitung
(36 Seiten)
(36 Seiten)
Software HP PROCURVE 8212ZL Bedienungsanleitung
(219 Seiten)
(219 Seiten)
Software HP 1920-24G-PoE+ Bedienungsanleitung
(547 Seiten)
(547 Seiten)
Software HP PROCURVE 6600 Bedienungsanleitung
(854 Seiten)
(854 Seiten)
Software HP 3Gb Bedienungsanleitung
(86 Seiten)
(86 Seiten)
Software HP SunSoft Pascal 4.0 Bedienungsanleitung
(333 Seiten)
(333 Seiten)
Software HP 10TB Betriebsanweisung
(181 Seiten)
(181 Seiten)
Software HP DL380-SL Betriebsanweisung
(141 Seiten)
(141 Seiten)
Software HP Switch 6120 Bedienungsanleitung
(469 Seiten)
(469 Seiten)
Software HP BMD00022 Bedienungsanleitung
(228 Seiten)
(228 Seiten)
Software HP SN6000 Betriebsanweisung
(122 Seiten)
(122 Seiten)
Software HP 3PAR Bedienungsanleitung
(89 Seiten)
(89 Seiten)
Whirlpool R 24 S (EU) podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Lodówki Whirlpool R 24 S (EU).
Dostarczamy 1 pdf podręczników Whirlpool R 24 S (EU) do pobrania za darmo według typów dokumentów: Instrukcja Obsługi
Kommentare zu diesen Handbüchern