HP P9500 Bedienungsanleitung PDF herunterladen (Seite 111)

HDLM management-target paths, and then re-execute the procedure

of step 6. The hdisk of the boot disk cannot be deleted.

Inheriting the existing hdisk configuration

When the existing hdisk configuration is successfully inherited, the

KAPL10531-I message is displayed.

If the KAPL10531-I message is not displayed, make sure that no

processes, services, file systems, or volume groups are using any

HDLM management-target paths, and then re-execute the procedure

in step 6. The status of the boot disk's hdisk cannot be changed.

7. Execute the following command and verify the status of the hdisks

recognized as HDLM-managed devices:

# lsdev -Cc disk

If you attempted to delete an existing hdisk by executing the

dlmrmdev utility, verify that the hdisk has been deleted.

If you attempted to inherit the existing hdisk configuration by

executing the dlmrmdev utility with the -e parameter specified, verify

that the status of the hdisks is Defined.

hdisk0 Available 1S-08-00-8,0 16 Bit LVD SCSI Disk Drive

hdisk1 Available 1S-08-00-9,0 16 Bit LVD SCSI Disk Drive

hdisk2 Available 1S-08-00-10,0 16 Bit LVD SCSI Disk Drive

hdisk3 Defined 1H-08-02 Hitachi Disk Array (Fibre)

hdisk4 Defined 1H-08-02 Hitachi Disk Array (Fibre)

...

8. If the license has expired, prepare the license key or license key file.

If the license has not expired, proceed to step 9.

When only the license key has been provided

Create the /var/DLM directory, and then, in this directory, create the

license key file (dlm.lic_key). The following shows an example when

the license key is 123456789ABCDEF:

# mkdir /var/DLM

# echo "123456789ABCDEF" > /var/DLM/dlm.lic_key

When the license key file has been provided

Store the license key file directly under the /var/tmp/ directory by

using the hdlm_license name.

/var/tmp/hdlm_license

Note that the hdlm_license and dlm.lic_key files are deleted after

installation finishes successfully.

9. Insert the HDLM DVD-ROM into the DVD-ROM drive, and mount the DVD-

ROM..

If you install HDLM by using a directory to which the DVD-ROM is copied,

you do not have to perform this step.

10. For an upgrade installation, execute the following command:

When installing HDLM from the DVD-ROM

Creating an HDLM Environment

3-45

Hitachi Dynamic Link Manager User Guide for AIX

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 493 494

Kommentare zu diesen Handbüchern

Keine Kommentare

HP P9500 Bedienungsanleitung Seite 111

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software HP P9500