HP 8/20q Bedienungsanleitung PDF herunterladen (Seite 43)

HP 8/20q Fibre Channel Switch QuickTools Switch Management User Guide 43

Adding zone members

You can zone a port/device by switch domain ID and port number, device port Fibre Channel address, or

the device port WWN. Adding a port/device to a zone affects every zone set in which that zone is a

member. To add ports/devices to a zone:

1. Select Zoning > Edit Zoning to open the Edit Zoning dialog box.

2. Choose one of the following options to add the port/device:

• Select a port/device in the Port/Device tree, and drag it into the zone. To select multiple

ports/devices, press and hold down the Control key while selecting and dragging.

• Select a port/device in the Port/Device tree. To select multiple ports/devices, press and hold down

the Control key while selecting. Select a zone set in the left pane. Select Edit > Add Members.

• Select a port/device in the Port/Device tree. To select multiple ports/devices, press and hold down

the Control key while selecting. Select a zone set in the left pane, and then click Insert.

If the port/device you want to add is not in the Port/Device tree, you can add it by doing the following:

a. Right-click the selected zone.

b. Select Edit > Create Members.

c. Select the WWN, Domain/Port, or First Port Address option.

d. Enter the hexadecimal value for the port/device according to the option selected: 16 digits for a

WWN member, 4 digits for a Domain/ Port member (DDPP), or a 6-digit Fibre Channel Address

for a First Port Address member (DDPPAA), where DD=domain ID, PP=port number, and

AA=AL_PA.

3. Click OK to display the Error Check dialog box.

4. Click Error Check to have the application check for zoning conflicts, such as empty zones, aliases, or

zone sets.

5. Click Save Zoning to implement the changes.

6. Click Close to close the Error Check dialog box.

7. Click Close to close the Edit Zoning dialog box.

NOTE: Domain ID conflicts can result in automatic reassignment of switch domain IDs. These

reassignments are not reflected in zones that use a domain ID/port number pair to define their

membership. Be sure to reconfigure zones that are affected by a domain ID change.

Renaming a zone

To rename a zone:

1. In the Zone Sets tree of the Edit Zoning dialog box, click the zone to be renamed.

2. Select Edit > Rename.

3. In the Rename Zone dialog box, enter a new name for the zone.

4. Click OK.

5. Click Apply in the Edit Zoning dialog box to save the change.

6. Click Close to close the Edit Zoning dialog box.

Removing a zone member

Removing a zone member affects every zone and zone set in which that zone is a member. To remove a

member from a zone:

1. In the Edit Zoning dialog box, select the zone member to be removed.

2. Select Edit > Remove.

3. Click Yes in the Remove dialog box to save the change.

4. Click Apply in the Edit Zoning dialog box to save the change.

5. Click Close to close the Edit Zoning dialog box.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 107 108

Kommentare zu diesen Handbüchern

Keine Kommentare

HP 8/20q Bedienungsanleitung Seite 43

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software HP 8/20q