HP 5300 Technical Information PDF herunterladen (Seite 324)

100

101

File Transfers

Transferring Switch Configurations and ACL Command Files

Transferring Switch Configurations and

ACL Command Files

Transfer Features

Feature Default Menu CLI Web

Use TFTP to copy from a remote host to a config

file.

n/a — below —

Use TFTP to copy a config file to a remote host. n/a — page A-21 —

Use TFTP to upload and execute a command file n/a — page A-21 —

for configuring or replacing an ACL in the switch

configuration.

Use Xmodem to copy a configuration from a

serially connected host to a config file.

n/a — page A-23 —

Use Xmodem to copy a config file to a serially

connected host.

n/a — page A-23 —

\Using the CLI commands described in this section, you can copy switch

configurations to and from a switch, or copy an ACL command file to configure

or replace an ACL in the switch configuration.

Note It is useful to note here that you can perform all TFTP operations using SFTP

as described in the section on Using Secure Copy and SFTP on page A-7 for

greater security, if needed.

TFTP: Copying a Configuration from a Remote Host

Syntax:

copy tftp < startup-config | running-config >< ip-address > < remote-file >

This command copies a configuration from a remote host to

the startup-config file in the switch. (See

“Using Primary and

Secondary Flash Image Options” on page 6-12 for information

on the startup-config file.)

For example, to download a configuration file named sw5300 in the configs

directory on drive “d” in a remote host having an IP address of 10.28.227.105:

HPswitch# copy tftp startup-config 10.28.227.105

d:\configs\sw2512

A-20

1 2 ... 319 320 321 322 323 324 325 326 327 328 329 ... 441 442

Kommentare zu diesen Handbüchern

Keine Kommentare

HP 5300 Technical Information Seite 324

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software HP 5300