HP Proliant ML350 Generation 3 Betriebsanweisung PDF herunterladen (Seite 16)

Operations 16

Operations

In this section

Power up the server................................................................................................................................ 16

Power down the server............................................................................................................................ 16

Extend the server from the rack ................................................................................................................ 16

Access the server rear panel (rack model) ................................................................................................. 17

Open or remove the tower bezel.............................................................................................................. 17

Remove the access panel ........................................................................................................................ 18

Install the access panel ........................................................................................................................... 19

Power up the server

To power up the server, press the Power On/Standby button.

Power down the server

WARNING: To reduce the risk of personal injury, electric shock, or damage to the

equipment, remove the power cord to remove power from the server. The front panel

Power On/Standby button does not completely shut off system power. Portions of the

power supply and some internal circuitry remain active until AC power is removed.

IMPORTANT: If installing a hot-plug device, it is not necessary to power down the server.

1. Back up the server data.

2. Shut down the operating system as directed by the operating system documentation.

3. If the server is installed in a rack, press the UID LED button on the front panel. Blue LEDs illuminate on

the front and rear panels of the server.

4. Press the Power On/Standby button to place the server in standby mode. When the server activates

standby power mode, the system power LED changes to amber.

5. If the server is installed in a rack, locate the server by identifying the illuminated rear UID LED button.

6. Disconnect the power cords.

The system is now without power.

Extend the server from the rack

1. Pull down the quick-release levers on each side of the server to release the server from the rack.

IMPORTANT: If the server is installed in a telco rack, remove the server from the rack to access internal

components.

2. Extend the server on the rack rails until the server rail-release latches engage.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 105 106

Kommentare zu diesen Handbüchern

Keine Kommentare

HP Proliant ML350 Generation 3 Betriebsanweisung Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Server HP Proliant ML350 Generation 3