HP E5000 Betriebsanweisung PDF herunterladen (Seite 119)

3. Extend the hard drive drawer (3).

5. Label the hard drives.

NOTE: Use the drive labels provided with the replacement drive drawer when removing the

drives to ensure you replace the drives in the correct order.

6. Remove all hard drives.

IMPORTANT: You must install the hard drives into the same slots from which they were

removed, or the system might fail.

7. Push the drive drawer back into the messaging system enclosure.

8. Label each server blade, and the remove both server blades.

9. Label the cables, and then unplug all cables from the back of the messaging system enclosure.

10. Unscrew the retaining screws from the bezel ears, and then remove the enclosure from the

rack.

WARNING! The messaging system enclosure is heavy, even after removing the hard drives.

Always use at least two people to remove the messaging system from the rack.

11. Remove the top back panel by pressing the panel release button and lifting the latch to slide

the top back panel off.

12. Lift up on the drive fan release mechanism and remove the fan.

13. Push up on the SAS I/O module release button.

14. Push down on the SAS I/O module lever (1), and then remove the SAS I/O module (2).

Removing and replacing a drive drawer 119

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 206 207

Keine Kommentare

HP E5000 Betriebsanweisung Seite 119