HP E5000 Betriebsanweisung PDF herunterladen (Seite 112)

2. Shut down blade 1 by clicking on Start and then Shut Down while you are connected to

blade 2.

3. Power off the expansion nodes, if present, by pressing and holding the power button at

the back.

4. Power off the storage solution by pressing and holding the power button at the back of

the enclosure.

5. Disconnect the power cables.

4. Extend the hard drive drawer:

1. Press upward on the release button on the hard drive drawer (1).

2. Pull the drawer handle down 90 degrees (2).

3. Extend the hard drive drawer (3).

5. Remove all eight screws from the front bezel (1). Then lift the front bezel up and out to remove

the front bezel (2).

NOTE: There are two screws on the bottom, four screws on the sides (two on each side),

and two screws hidden behind the handle.

112 Removing and replacing hardware components

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 206 207

Keine Kommentare

HP E5000 Betriebsanweisung Seite 112