HP OfficeConnect Router Series Bedienungsanleitung PDF herunterladen (Seite 41)

■ PPTP User Name - The user name you use to access your ISP.

■ PPTP Password - The password you use to access your ISP.

■ Primary DNS Address — If your ISP requires the address of a

Primary DNS Server then enter it in the field labelled Primary

DNS Address.

■ Secondary DNS Address — If your ISP requires the address of

a Secondary DNS Server then enter it in the field labelled

Secondary DNS Address, otherwise leave the box blank.

■ Maximum Idle Time - The amount of time without activity

before the Router terminates the Internet connection.

Initial IP Address and Initial Subnet Mask - IP settings must be

used when establishing a PPTP connection. Alternatively, if the

PPTP server is located in your DSL modem, click Suggest to select

an IP address on the same subnet as the PPTP server.

LAN Settings

The LAN Settings screen allows you to change the TCP/IP settings

of your Router and its DHCP server.

Figure 35 Unit Configuration Screen

Changing the LAN Settings

These settings will have been entered during the set-up wizard

when the device is first used. You only need to change these if

you reconfigure your network. If you make any changes, click

Apply to save them to the Router.

When changing the IP Address of the Router choose an address

that will be unique in your network and in your network’s

subnet. The default IP Address of the Router is 192.168.1.1.

When you change the IP Address of the Router you must reboot

all computers that gain their IP address from the Router before

they will be able to access the Internet.

dua08609-5aaa01.book Page 41 Thursday, September 11, 2003 12:15 PM

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 111 112

Keine Kommentare

HP OfficeConnect Router Series Bedienungsanleitung Seite 41